Knightronix custom designed Round Tip Single Open Flame Burner (with Brass Valve, TEE Coupler & 3/16" Flare Connection Fittings).
A perfect burner and valve combination for those smaller lanterns where you want to connect the gas line from the inside of the lantern using
3/16" Flare connection fittings and a smaller diameter copper tubing.
- Round Top Burner Tip
- Solid Brass 1/8" NPT fittings
- Fittings sealed with TFE pipe thread compound
- Choice of Natural Gas or Propane Orifice:
- Natural Gas Orifice (0.020); 1579 BTU/h @ 7" W.C
- Propane Orifice (0.012); 1025 BTU/h @ 10" W.C
- Produces a 1 1/2" high flame
- CSA Design certified gas shut-off valve; designed to meet ANSI Z21.15.CSA 9.1 pressure requirements of 1/2 psig at temperatures from 32° to 125° F.
- Insulated valve handle; when used in this configuration, meets ANSI Z21.42-2013 manual shut-off valve maximum handle temp standards (Does not exceed room temperature by more than 60 degrees F for non-metallic handles.)
- Height: 3.75" (from the bottom of the T coupler to the top of the burner tip.) Total Height: 4.75"
- Width: 2"
- Gas Connection Fittings included
- Brass Male 45º Flare Connector – 3/16 Flare x 1/8" NPT (M-M)
- Brass 45º Flare Nut, ROD SHORT – 3/16"
Available Options:
Choose Fuel Type:
Shipping & Handling (Each):